Research 2020
Composites AM Market Opportunities

This 170-page study from 3dpbm Research provides an in-depth analysis of each major sub-segment in composites...

3D Printer Hardware3D Printing ProcessesAM for SpaceCeramics Additive ManufacturingMaterialsMetals

TIWARI and ESA validate ceramic and metal materials for RAPTOR 3D printer

The bound powder filament extrusion system was supported by the Space Agency's incubation center

ESA-supported startup TIWARI Scientific Instruments in Germany has developed low-cost 3D printer, the RAPTOR, which is capable of 3D printing a variety of metals and ceramics using a bound powder filament extrusion process. While the 3D printer is similar to other systems now available in the market – such as those introduced by Nanoe and Triditive among others – TIWARI was able to leverage support from ESA to validate four metal and ceramic materials for space and other applications.

TIWARI’s process uses thermoplastic filaments that are embedded with particles of the metal or ceramic the part is to be made from. Once the printing is finished, the green part is put through a thermal treatment to eliminate the plastic, leaving behind a metal or ceramic item.

“Once this plastic-containing body goes through this treatment then what is left behind is pure metal or ceramic,” explained ESA non-metallic materials and processes engineer Ugo Lafont. “The result is high-quality parts with very good physical properties. So this cheap, simple technique can offer us additional part manufacturing capability for space applications with an expanded pallet of materials.”

Test parts made using the extrusion process in stainless steel and titanium metals, as well as aluminia and silicon carbide ceramics underwent a full-scale campaign of non-destructive and destructive testing at the Materials and Electrical Components Laboratory of ESA’s ESTEC technical centre in the Netherlands, assessing their added value and suitability for space.

According to ESA the parts possess enhanced mechanical performance compared to their conventionally made equivalents – for instance, stainless steel can be elongated to a previously unachievable 100% without breaking.

TIWARI is a startup hosted at ESA’s Business Incubation Centre Hessen & Baden-Württemberg in Germany, specialising in instruments for thermal characterisation of materials as well as 3D printing of high-performance metals and ceramics.

“Desktop 3D printers have become cheaper and cheaper in recent years and there’s been a lot of interest in mixing in materials with traditional print stock,” explained company founder Siddharth Tiwari. “But our company’s particular focus has really been on understanding the process thoroughly and investigating the kind of thermal and mechanical properties we can achieve.

“So this test campaign with ESA was part of our strategic planning from the start, to help commercialise the technology. At a time when other companies are still speculating about the properties achievable with 3D printed parts we have tested and qualified not one but four separate materials.

“This means we’ve ended up with a database no other company possesses, thanks to being able to make use of ESA resources – which otherwise would have cost many  tens of thousands of euros. And the fact that our parts make the grade for space helps us in terrestrial markets too.”

The collaboration between the ESA and TIWARI on the testing and evaluation of the 3D printed parts has been facilitated by ESA’s Technology Transfer and Patent Office.

“We hope to offer an affordable solution to a market often put off by the high prices associated with additive manufacturing,” added Siddharth Tiwari. “Our company offers one of the best price-to-performance ratio in the market, and we have launched an online estimation tool allowing customers to check how much the customised parts they require will cost.”     

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based 3dpbm. Today the company publishes the leading news and insights websites 3D Printing Media Network and Replicatore, as well as 3D Printing Business Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Back to top button

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!