MedicalMedical ModelsPersonalized Medicine

SJD Barcelona Children’s Hospital uses 3D printing to resect tumor

Using BCN3D's technology to carry out preoperative planning and simulation to resect a malignant tumor in an 11-year-old boy

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

The pediatric maxillofacial surgery team at the SJD Barcelona Children’s Hospital (SJD) has used BCN3D’s 3D printing technology to successfully perform a complicated operation to resect a malignant tumor in an 11-year-old boy. The medical team led by Dr. Josep Rubio, head of the maxillofacial surgery unit at SJD Barcelona Children’s Hospital, decided to carry out preoperative planning and simulation using BCN3D’s 3D printed technology and three-dimensional anatomical models of the parts of the patient’s skull, given the complexity of the operation.

The planning consisted of the 3D design of the anatomy of the limits of the resection to be performed in the subsequent intervention, creating an image of the skull and the patient’s child’s tumor, which was then 3D printed in the hospital’s 3D printing laboratory.

SJD Barcelona Children's Hospital uses 3D printing to resect tumor. Using BCN3D's technology to carry out preoperative planning..

The medical team and the radiologists managed to print both pieces thanks to BCN3D’s W27 3D printer from the Epsilon series – which, with its double extruder head and the materials (ABS), provided the necessary realism for the doctors to plan the actual surgical intervention based on the exact resection of the entirety of the child’s eye tumor (a facial osteosarcoma).

“The goal of the surgery was to remove a child’s tumor located in his cheekbone and to remove the tumor with safe margins. To do this we used 3D planning to delimit the limits of the resection. Nowadays, 3D planning at the SJD Barcelona Children’s Hospital is standard practice in maxillofacial surgery, especially in very complex cases such as the one we dealt with in this child. We had to create cutting and positioning guides to transfer the virtual planning from the computer to the operating theatre. This has allowed us to execute what we designed virtually with precision to be able to extract the safety margins next to the tumor as previously designed,” explained Dr. Josep Rubio.

The aim of the surgery was to remove Andres’ tumor, which was lodged in the cheekbone, and to remove it with safe margins – which is where 3D printing technology came into play, to plan the operation and accurately delineate the tumor in the cheekbone eye.

“3D printing helped us avoid potential postoperative complications and improved the quality for both the patient and the surgical process. After weeks of surgical planning, we were able to perform a complete resection of the lesion and also preserve the patient’s vision,” said Dr. Adaia Valls, maxillofacial surgeon at SJD Barcelona Children’s Hospital.

SJD Barcelona Children's Hospital uses 3D printing to resect tumor. Using BCN3D's technology to carry out preoperative planning..

Andrés was diagnosed with retinoblastoma when he was 11 months old. When his parents decided to have him treated at SJD Barcelona Children’s Hospital in 2016, the medical team decided to change his prosthesis in his right eyeball.

After two years of treatment to treat the first tumor, he recovered with a specific treatment. However, as Andrés was a carrier of a germline gene, the doctors told his parents that the boy could suffer a type of cancer in his bone system, something that happened years later when he developed a facial osteosarcoma.

The oncology team’s treatment plan was to carry out chemotherapy for three months, after which the team came to a fundamental part of the treatment – guaranteeing local control of the lesion. For this, it was essential to obtain a complete section of the tumor. Other local treatments, such as radiotherapy, for this type of tumor are not as effective. In addition to this – this patient had already had a radio-induced tumor.

SJD Barcelona Children's Hospital uses 3D printing to resect tumor. Using BCN3D's technology to carry out preoperative planning..

The SJD Barcelona Children’s Hospital is a pioneer in Spain, and Europe, in the research and implementation of new technologies. So much so that it uses 3D printing in more than 200 surgeries a year. In the hospital’s additive manufacturing service, they have, among others, BCN3D 3D printers from the Epsilon W27 and W50 series.

3D printing and planning made its debut at this center in 2013, after a doctor specifically requested a biomodel to complement the planning of a complex oncological case. Since then, the use of this technology has expanded exponentially, leading to the creation of a multidisciplinary group of nine different specialties that benefit from this technology.

“We decided to work with BCN3D 3D printers because they are the machines we usually use for planning anatomical bone models in maxillofacial surgery and complex surgery or trauma cases. We use materials that define excellent chromatic tonalities, accuracy in the printed pieces, and we obtain the best results with the efficiency of its double extruder system, printing very realistic pieces,” said Arnau Valls, innovation engineer for the 3D printing service of the SJD Barcelona Children’s Hospital.

Biomodels serve as a visual aid, portraying the anatomical relationships and the relationship of the tumor with the different anatomical parts. They function as a pre-surgical simulation model, aiding the practice of the cuts to be made by the surgeon. 3D printing helps to customize surgical interventions for each patient, accelerating the generation of support and guidance tools for the surgeon – such as cutting guides and implant positioning, improving the precision and safety of the surgery. Additionally, the team at the SJD Barcelona Children’s Hospital 3D planning unit has open lines of research to improve the printed models and achieve, through research into mechanical properties, colors, and textures, a better imitation of living tissues.

Research 2022
Polymer AM Market Opportunities and Trends

741 unique polymer AM companies individually surveyed and studied. Core polymer AM market generated $4.6 billion...

Edward Wakefield

Edward is a freelance writer and additive manufacturing enthusiast looking to make AM more accessible and understandable.

Related Articles

Back to top button

We use cookies to give you the best online experience and for ads personalisation. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!