3D Printing EventsFormnext 2022Sustainability

Siemens shows sustainable applications for green AM

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

At this year’s Formnext, the international trade fair for additive manufacturing, Siemens is demonstrating what sustainable additive manufacturing looks like. Using several use cases, the technology company shows how resources, carbon footprint and environmental impact can be reduced. For this purpose, the entire value chain of a product must be considered transparently. Then climate targets can be achieved, and an environmentally friendly industry can be designed.

Sustainable additive gripper solutions

In the first use case, Siemens proves that optimized product design plays an important role in green additive manufacturing. With the gripper solution of a handling robot used in automotive production, the total mass of the gripper could be reduced by 64 percent. By utilizing the design freedom in additive manufacturing in the design phase, weight and thus required material can be significantly reduced. With “NX for AM”, Siemens offers a seamless digital process chain to find the best design through topology optimization, then test it using FEM simulation and prepare it for printing.

In addition, “Teamcenter Product Cost Management” and “Product Carbon Footprint Calculator” allow for optimizing both production costs and carbon footprint of the product in advance. The specific project originally involved a gripper solution weighing over 58 kg, which was assembled from more than 660 parts. In addition to weight reduction, design freedom has also reduced 80 percent of assembly time by eliminating the need for complex assemblies. Comparing conventional and additive design, production costs were reduced by 73 percent; with an 82 percent lower carbon footprint. In addition, the weight reduction in turn enabled the use of smaller robots, resulting in energy savings of 54 percent per year.

Digitally optimized energy consumption

A second use case for environmentally friendly additive manufacturing is the cooperation with GENERA, a leading global supplier of highly automated, photopolymer-based additive manufacturing technologies, in conjunction with the “AM Digital Factory Planning toolbox” from Siemens Advanta. Here, the large-scale production of plug connections was simulated by use of digital light processing. Through the “Digital Twin of Production”, precise and transparent analyses of the energy consumption of the 3D printers under different machine states could be created without interfering with running systems. Due to more efficient energy management, it was possible to save between 25 and 30 percent of the energy requirement per component produced, depending on the utilization of the printers.

Environmentally friendly materials

In the third application, Siemens is demonstrating that in 3D printing for buildings and infrastructure environmentally friendly materials – ideally even completely biodegradable – offer enormous potential for a sustainable industry. AM machine builder CEAD and Poly Products, a Dutch composite materials expert, have developed 3D-printed flax harbor fenders as part of the EU’s SeaBioComp project. Harbour fenders are buffers that ensure that the quay walls do not damage the outer walls of the ships lying in port. Harbour fenders are usually made of plastic. This in turn enters the sea through abrasion as environmentally harmful microplastics.

The flax fenders are just as resistant as conventional harbor fenders, but have a smaller carbon footprint. The flax is 100 percent biodegradable. To produce fenders from flax, Poly Products relies on a 3D printer with a control system from Siemens. The Sinumerik 840D sl is installed in CEAD’s CFAM Prime 3-axis portal machine. This allows the required precision to be achieved in the complex robot movement to enable both the correct material application and the milling of the component to a final contour.

AM Network reduced carbon footprint

Additive manufacturing marks the way for manufacturing decentralization. It changes the existing paradigm of expensive physical inventory to a digital warehouse, where the goods are produced only when needed, nearby the point of consumption. It increases supply chain resiliency, decreases inventory costs, and decreases transportation CO2 emissions. Siemens Additive manufacturing digital solutions allow organizations to build, verify and certify these digital assets into pre-defined libraries, ready to be ordered by the click of a button. The Siemens AM Network routes these manufacturing requests to the most appropriate production sites to maximize the global production capacity and assure higher utilization of the equipment. Unnecessary downtimes are avoided, and energy spent in warming up and cool-down of the 3D printer is optimally used. The Siemens AM Network also allows companies to digitally interact with each other and optimize the use of underutilized production facilities with fluctuating production needs.

Research 2022
Polymer AM Market Opportunities and Trends

741 unique polymer AM companies individually surveyed and studied. Core polymer AM market generated $4.6 billion...

3D Printing Media Network

3D Printing Media Network is the online trade media portal published by 3dpbm, a leading marketing and market research firm specializing in the AM industry. 3dpbm also publishes the 3D Printing Business Directory, the AM Focus eBook series and the 3dpbm Research AM Market Reports. 3D Printing Media Network was founded with the goal to provide the latest industry news, insights and opinions to a global audience of professionals and decision makers.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button

We use cookies to give you the best online experience and for ads personalisation. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!