Industrial Additive ManufacturingMaritime Industry

Rolling in the deep, using AM for deepwater applications

ecoSUB Robotics, a company spun out of Planet Ocean, uses 3D printed components under extreme pressure some 2,500 meters below sea level

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

3D printed parts are now commonplace in end-use applications, but not all are used in as exacting an environment as the ones used by Planet Ocean, based in Camberley, UK. Planet Ocean is a specialist in the provision of high-quality, marine scientific instruments for research, survey, naval, and operations support. The company represents some of the world’s foremost manufacturers of oceanographic and marine meteorological equipment covering a wide spectrum of disciplines from radar wave measuring systems to seabed assessment systems, and autonomous underwater and surface vehicles.

ecoSUB Robotics — a company spun out of Planet Ocean to engage in the design and manufacture of underwater vehicles — regularly utilizes 3DPRINTUK as a supplier for a number of key 3D printed parts. These 3D printed components have to operate in saltwater, in very low temperatures, and under extreme pressure some 2,500 meters below sea level, while at the same time remaining water-tight and intact.

ecoSUB Robotics, a company spun out of Planet Ocean, uses 3D printed components under extreme pressure some 2,500 meters below sea level

Jeremy Sitbon, Chief Robotics Engineer – Marine Robotics Systems at ecoSUB Robotics said: “For sure, the parts that we use in our underwater vehicles have to be strong and robust, and absolutely conform to design intent. 3D printing is preferred over injection molding as we find the technology more versatile, and the design freedom allows us to innovate great parts. Also, our volumes are low (maybe 10 parts per month) so injection molding would not be economical. Add in the fact that with 3D printing we can customize designs for individual clients, and the choice is clear. We use 3D printing for prototyping and production applications and transitioned from Additive to 3DPRINTUK as the two companies merged in 2021. For us, it is vital that the prototype and production parts that we order are competitively priced, high quality, and speedily delivered, and in 3DPRINTUK we find all of this and more. Key to the success of our relationship is the inherent knowledge and experience that resides within the 3DPRINTUK team. They have a ‘can-do attitude, and their understanding of Design for AM (DfAM), and the management of the 3D printing process to maximize efficiencies and therefore reduce costs per part are of vital importance to us.”

ecoSUB Robotics , a company spun out of Planet Ocean, regularly utilizes 3DPRINTUK as a supplier for a number of key 3D printed parts.

All the 3D printed parts used by ecoSUB Robotics for production are trialed in small prototype batches and integrated into the marine vehicles before production quantities are ordered. The reason that cost is so important to the company is that they see enormous potential for their underwater vehicles not just to be used by professionals within the military and oil and gas sectors, but also research scientists gathering important information about climate change. Price is key to making this advanced technology available to a wide user group. ecoSUB Robotics is able to take advantage of both the MJF and SLS services offered by 3DPRINTUK to maximize the benefits of the different polymer powder bed fusion (PBF) processes.

ecoSUB Robotics, a company spun out of Planet Ocean, uses 3D printed components under extreme pressure some 2,500 meters below sea level

Sitbon continued: “We are constantly on the lookout for the most cost-effective 3D printing solution for our underwater vehicles, but we cannot compromise on quality at all. There are two different kinds of parts and components in the vehicles, external parts that can be seen, and internal parts that cannot. The external parts need to be yellow for the sake of visibility, and we use SLS for these as the technology produces whiter parts than MJF, and in our opinion, this makes the addition of a color that much more definite and striking. MJF parts are somewhat greyer, and this makes the processed color less vivid. For parts used internally, which do not need to be colored and do not need to be aesthetic, we use MJF parts as they are typically less expensive. So, I guess we have the perception that SLS as a process is more versatile when finishing and dyeing are required, but as we are convinced over time that MJF improves in this respect, we will most likely shift all parts to MJF due to price considerations and the fact that more exacting tolerances can be made repeatably with this 3D printing process meaning improved detailing on parts. It is hugely valuable to us that 3DPRINTUK has both technologies at its fingertips, and has the knowledge and expertise to advise on the best technology for each application.”

ecoSUB Robotics see pros and cons with both SLS and MJF but find that MJF parts seem to have a better finish before post-processing, and this would be an advantage for external colored parts which when made via SLS tend to get dirty and look worn over time and under heavy usage.

ecoSUB Robotics , a company spun out of Planet Ocean, regularly utilizes 3DPRINTUK as a supplier for a number of key 3D printed parts.

Sitbon concluded: “The assessment of SLS and MJF will continue, and we are happy to be guided as to which process to use for internal and external applications by the 3DPRINTUK team. Because of the harsh environments that some of our vehicles are used in, the integrity of the material chosen is everything, and we are amazed by both processes which can withstand intense cold, high pressure, and the corrosive nature of saltwater, and still pass rigorous water-tightness tests. We will continue to use 3DPRINTUK as we have not found an online ordering system that comes close to theirs in terms of ease-of-use, and the team has an enormous depth of knowledge in material selection, DfAM, and print optimization that benefits us on every level”.

Research 2021
Ceramic AM Market Opportunities and Trends

This market study from 3dpbm Research provides an in-depth analysis and forecast of the ceramic additive ma...

Andrea Gambini

Andrea has always loved reading and writing. He started working in an editorial office as a sports journalist in 2008, then the passion for journalism and for the world of communication in general, allowed him to greatly expand his interests, leading to several years of collaborations with several popular online newspapers. Andrea then approached 3D printing, impressed by the great potential of this new technology, which day after the day pushed him to learn more and more about what he considers a real revolution that will soon be felt in many fields of our daily life.

Related Articles

Back to top button

We use cookies to give you the best online experience and for ads personalisation. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!