AM ResearchElectronicsIoTMetal Additive ManufacturingMulti-material 3D printing

Researchers 3D print complex metal–plastic composite structures

Creating precise patterns on the external and internal surfaces of 3D plastic structures

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

According to an article published by Waseda University, researchers from Japan and Singapore have developed a new 3D printing technique to create precise patterns on the external and internal surfaces of 3D plastic structures. In recent years, research interest in the 3D printing of metal patterns on plastic parts has grown exponentially, due to its high potential in the manufacturing of next-generation electronics. Now, researchers have developed a new 3D printing process for the fabrication of 3D metal–plastic composite structures with complex shapes.

Researchers 3D print complex metal–plastic composite structures. Creating precise patterns on the surfaces of 3D plastic structures.
Examples of 3D metal–plastic composites that can be prepared using the new technology. Source: Waseda University.

3D metal–plastic composite structures have widespread potential applicability in smart electronics, micro/nanosensing, internet-of-things (IoT) devices, and even quantum computing. Devices constructed using these structures have a higher degree of design freedom, and can have more complex features, complex geometry, and increasingly smaller sizes. However, current methods to fabricate such parts are expensive and complicated.

The researchers have developed a new multi-material digital light processing 3D printing (MM-DLP3DP) process to fabricate metal–plastic composite structures with arbitrarily complex shapes. “Robots and IoT devices are evolving at a lightning pace. Thus, the technology to manufacture them must evolve as well. Although existing technology can manufacture 3D circuits, stacking flat circuits is still an active area of research. We wanted to address this issue to create highly functional devices to promote the progress and development of human society,” said lead authors Professor Shinjiro Umezu, Mr. Kewei Song from Waseda University, Japan, and Professor Hirotaka Sato from Nanyang Technological University, Singapore, when explaining the motivation behind the study, which has been published in ACS Applied Materials & Interfaces.

The MM-DLP3DP process is a multi-step process that begins with the preparation of the active precursors – chemicals which can be converted into the desired chemical after 3D printing, as the desired chemical cannot be 3D printed itself. Here, palladium ions are added to light-cured resins to prepare the active precursors. This is done to promote electroless plating (ELP), a process that describes the auto-catalytic reduction of metal ions in an aqueous solution to form a metal coating. Next, the MM-DL3DP apparatus is used to fabricate microstructures containing nested regions of the resin or the active precursor. Finally, these materials are directly plated, and 3D metal patterns are added to them using ELP.

Researchers 3D print complex metal–plastic composite structures. Creating precise patterns on the surfaces of 3D plastic structures.
Source: Waseda University.

The research team manufactured a variety of parts with complex topologies to demonstrate the manufacturing capabilities of the proposed technique. These parts had complex structures with multi-material nesting layers, including microporous and tiny hollow structures, the smallest of which was 40μm in size. The metal patterns on these parts were very specific and could be precisely controlled. The team also manufactured 3D circuit boards with complex metal topologies, like an LED stereo circuit with nickel and a double-sided 3D circuit with copper.

“Using the MM-DLP3DP process, arbitrarily complex metal–plastic 3D parts having specific metal patterns can be fabricated. Furthermore, selectively inducing metal deposition using active precursors can provide higher-quality metal coatings. Together, these factors can contribute to the development of highly integrated and customizable 3D microelectronics,” stated the researchers.

The new manufacturing process promises to be a breakthrough technology for the manufacturing of circuits, with applications in a diverse variety of technologies, including 3D electronics, metamaterials, flexible wearable devices, and metal hollow electrodes.

Research 2022
Polymer AM Market Opportunities and Trends

741 unique polymer AM companies individually surveyed and studied. Core polymer AM market generated $4.6 billion...

Edward Wakefield

Edward is a freelance writer and additive manufacturing enthusiast looking to make AM more accessible and understandable.

Related Articles

Back to top button

We use cookies to give you the best online experience and for ads personalisation. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!