3D Printing Events3D Printing ProcessesAM Software

“Playtime’s Over, But Don’t Panic,” Says Materialise in Anticipation of formnext

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Additive Manufacturing is on the cusp of going mainstream in some of the toughest manufacturing environments out there – and has huge potential to disrupt whole industries. But the shift poses a profound challenge: the rules of prototyping and customization no longer apply in the world of real parts and serial production. AM is leaving its comfort zone and has to raise its game fast, starting at the upcoming formnext show.

This is the backdrop against which Materialise, a leading provider of AM software and sophisticated 3D printing solutions, will be showing its range of new software tools and features at formnext – solutions that are all geared up for a new AM reality.

New benchmarks set by Automotive, Aerospace and Medical

Stefaan Motte, Vice President of Materialise’s Software Unit, explains: “It truly is a new reality we’re dealing with. The new benchmarks for our industry have to be Automotive’s ultra-efficiency, Aerospace’s absolute accountability and Medical’s full traceability. That feels like a departure from what we’re used to, but in fact, a lot of the building blocks are already in place. At Materialise, we’ve already built the tools we need to reach these new benchmarks – and have used them in our own production.”

materialise_logo At formnext (15-18 November, Frankfurter Messe, Stand F28 in Hall 3.1), Materialise will unveil new features and solutions that add to its continuously evolving software backbone, the Materialise Magics 3D Print Suite, making it the most complete and advanced package for Additive Manufacturing available today.

Stefaan continues: “We’re in the lucky position that we’ve been acclimatizing to the new reality for quite some time now. We’re already used to the high quality standards, certifications and specifications of an industry like Aerospace, or the uncompromising efficiency of Automotive. We’ve run into and have overcome a lot of the challenges already and have built the learnings into our software suite.”

New software tools

The focus on efficiency and repeatability translates into software tools and features that speed up preparation time for builds, for example by automating the generation of support structures and helping with orientation recommendations.

A completely new monitoring and inspection software, also to be introduced at formnext, tackles waste, high scrap rates and validation issues, while countless new features in established products save time, join up steps, improve first-time-right rates, and enable better use of specialist skills, particularly for metal builds.

Stefaan explains: “Metal is the fastest growing area in AM at the moment, so we’re adding a raft of features and functionalities to our software package that will accelerate progress in metal AM at a mass manufacturing scale.”

A grown-up approach to making AM work

In order to fully control complex production environments that include AM processes, deep integration is needed.

Stefaan comments: “To keep up with the demands of high-end, fast-paced manufacturing environments, AM processes have to be able to fit in with complex, very disciplined ecosystems. That means we have to start looking at the whole thing end-to-end. We have to be able to join up all steps of the AM process seamlessly, control it tightly and integrate it with other production processes. A lot of that can be done through software, but to work in the world of real manufacturing, this software has to be open, agnostic, collaboration-ready and helpful. That’s still not always the case.”

Materialise has always been “open” by default, allowing the company to constantly apply its innovation power to new areas – and innovate through co-creation. This openness and humble curiosity is now needed to make AM work in new sectors.

Stefaan concludes: “I predict that the last few remaining “walled garden” solutions in AM software will now come under pressure to open up. For us, openness has always been a no-brainer, as it allows us to get our technology out there quickly, partnering with industry leaders to prove it in as many scenarios as possible. In a way, this biggest shift in the industry is the moment we’ve been waiting for – to show how much we can achieve together.”

The Materialise team is keen to build new partnerships and encourages potential partners to come forward at formnext to make their AM idea a reality.

Research 2021
Ceramic AM Market Opportunities and Trends

This market study from 3dpbm Research provides an in-depth analysis and forecast of the ceramic additive ma...

3D Printing Media Network

3D Printing Media Network is the online trade media portal published by 3dpbm, a leading marketing and market research firm specializing in the AM industry. 3dpbm also publishes the 3D Printing Business Directory, the AM Focus eBook series and the 3dpbm Research AM Market Reports. 3D Printing Media Network was founded with the goal to provide the latest industry news, insights and opinions to a global audience of professionals and decision makers.
Back to top button

We use cookies to give you the best online experience and for ads personalisation. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services



Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*