3D Printer HardwareDefense

Phillips Federal Expands acquires WarpSPEE3D AM machine

To be installed at the Center of Innovation at Rock Island Arsenal

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Phillips Federal, a specialist service provider and machine distributor for the US Federal Government, has signed an agreement to acquire a new WarpSPEE3D Metal AM printer from SPEE3D to be located at their Center of Innovation at the Rock Island Arsenal.

Developed by Australian company SPEE3D, the world-leading WarpSPEE3D CSAM technology will be assigned at Phillips Federal’s Center of Innovation co-located at the Rock Island Arsenal’s Additive Manufacturing Center of Excellence. Phillips Federal and the US Army will use the WarpSPEE3D to further develop the facility’s Additive Manufacturing capability and develop large format, parts-on-demand metal applications for the US Army.

Phillips Federal Expands acquired a WarpSPEE3D AM machine to be installed at the Center of Innovation at Rock Island Arsenal John Harrison, Global Director of Phillips Additive, stated, “Since 2020, the unique high-speed capabilities of SPEE3D technology have proven to be an excellent addition in supporting the RIA’s manufacturing innovation objectives, and the scope of our P3 Program. The new WarpSPEE3D printer at the RIA’s Center of Excellence for Advanced Manufacturing facility will allow us to further our scope and make cutting-edge achievements in developing large-format applications for expeditionary forces in the US”.

Phillips Corporation, Federal Division, is the leading service provider and manufacturing partner to the United States Federal Government. Phillips Federal first added the metal Additive Manufacturing technologies of SPEE3D to support its Public-Private Partnership (P3) and Additive Manufacturing programs at the US Army’s Rock Island Arsenal (RIA) in 2020.

In 2022, SPEE3D’s WarpSPEE3D technology will be added to the Center of Excellence for Advanced Manufacturing to support activities in material exploration and research, and the development and manufacture of future large-format applications and prototypes for the Army et al Armed Forces.

Bruce Colter, SPEE3D’s Vice President & General Manager of North America added, “We expect the delivery of this new WarpSPEE3D printer to provide Phillips Federal & the Rock Island Arsenal with additional capabilities from our patented Cold Spray AM technology, the fastest metal 3D printing capability in the world. WarpSPEE3D printers have demonstrated in field trials that they can make high-quality metal parts on-demand which are critical to keep military equipment & vehicles operational. The American AM space is growing rapidly, and SPEE3D’s technology is only growing with it”.

Since 2020, the WarpSPEE3D has been used often by Defense forces for an on-demand, deployable metal manufacturing capability. In 2020 and 2021, the Australian Army conducted several field trials with their WarpSPEE3D tactical printer at Mount Bundey, and Bradshaw Training Area during Exercise Koolendong. The field trials in 2020 resulted in over fifty case studies of printable parts and demonstrated that SPEE3D’s WarpSPEE3D printer was robust enough to operate in remote Australian bushland. In 2021, the program was extended to verify initial results, along with the establishment of new field trials and the Australian Army’s Additive Manufacturing Cell (AMC) technicians. In the 2021 field trials, the Australian Army successfully proved it is possible to 3D print, certify, validate, and replace armored vehicle parts in the field. The success of these trials demonstrated that additive manufacturing could play an important part in the future of Defense readiness.

“We believe this expansion is an exciting opportunity for SPEE3D and the DoD forces. Our smaller LightSPEE3D system has been used as part of the RIA program with great success. With a WarpSPEE3D, Phillips Federal & the Rock Island Arsenal will be able to explore a wider range of large, high quality, low-cost metal parts manufactured quickly,” said Byron Kennedy, CEO of SPEE3D.

Research 2021
Ceramic AM Market Opportunities and Trends

This market study from 3dpbm Research provides an in-depth analysis and forecast of the ceramic additive ma...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based 3dpbm. Today the company publishes the leading news and insights websites 3D Printing Media Network and Replicatore, as well as 3D Printing Business Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Back to top button

We use cookies to give you the best online experience and for ads personalisation. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!