Acquisitions, Mergers & PartnershipsAM ResearchMicro 3D printingOpticsResearch & Education

Optical glass fiber optimized using 3D printing

Achieved by 3D nanoprinting an optical lens which was applied to the end of the fiber

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

An interdisciplinary team of researchers from Korea, Australia, Great Britain, and Germany – with the participation of the Leibniz Institute of Photonic Technology (Leibniz IPHT) – were able to, for the first time, optimize an optical glass fiber in such a way that light of different wavelengths can be focused extremely precisely. This level of accuracy was achieved by 3D nanoprinting an optical lens, which was applied to the end of the fiber. This opens up new possibilities for applications in microscopy and endoscopy as well as in laser therapy and sensor technology.

Lenses at the end faces of optical fibers currently used in endoscopy for medical diagnostics have the disadvantage of chromatic aberration. This imaging error of optics (caused by the fact that light of different wavelengths, ie. different spectral colors, is shaped and refracted differently) leads to a shift in the focal point and thus to blurring in imaging over a wide range of wavelengths. Achromatic lenses, which can minimize these optical aberrations, offer a solution to this.

Such an achromatic lens, a so-called meta lens, which is attached to the end of an optical fiber and allows focusing and imaging of minute details with depth-of-field imaging, has now been realized, for the first time, by the international team. “For ideal light shaping and achromatic focusing, we realized an ultra-thin polymer-based lens, which consists of a complex design of geometric structures in the form of nanopillars. This structure was printed directly on the tip of a 3D printed hollow tower structure on one of the end faces of a commercial optical fiber. In this way, optical fibers can be functionalized in such a way that light can be focused very efficiently on a focal point and images with high resolution can be generated,“ explained Prof. Dr. Markus Schmidt, head of the Fiber Photonics Department at Leibniz IPHT.

Optical glass fiber optimized using 3D printing. Achieved by 3D nanoprinting an optical lens which was applied to the end of the fiber. The meta lens has a lens diameter of 100 micrometers and a numerical aperture (NA) of 0.2, which is significantly higher compared to previously-used achromatic lenses on the end of fiber end faces, and thus achieves better resolution. The lens allows optical aberrations to be corrected, and light in a spectral bandwidth of 400 nanometers in the infrared range to be focused, very precisely. “It is remarkable that the individual nanopillars have different heights ranging from 8.5 to 13.5 micrometers. This allows the different wavelengths of light to be focused on a single focal point,“ said Prof. Dr. Markus Schmidt.

In experimental studies, the researchers were able to demonstrate the lens and focusing efficiency of the developed fiber optics using fiber-based confocal scanning imaging as an example: Using a fiber with achromatic meta-optics, the team achieved convincing image quality with high image acquisition efficiency, and high image contrast at different wavelengths. The focus positions remained almost constant even at different wavelengths.

“Since the developed nanostructured meta lens is extremely small and flat, a fiber optic design with achromatic optics at the top offers the potential to further advance miniaturized and flexible endoscopic imaging systems based on fiber technology and to enable even more gentle minimally invasive examinations,“ said Prof. Dr. Markus Schmidt, when explaining a possible application scenario. In addition to this main area of application, the researchers see further areas of application in the field of laser-assisted therapy and surgery, fiber-optic communication, and fiber sensor technology.

The realized meta lens on the end face of an optical fiber is the result of a joint and international collaboration between researchers from Monash University in Melbourne, Australia, Ludwig-Maximilians-Universität München, Germany, Pohang University of Science and Technology, Korea, University in Jena, Germany, POSCO-POSTECH-RIST Convergence Research Center for Flat Optics and Metaphotonics in Pohang, Korea, Imperial College London, UUK, and Leibniz IPHT.

The researchers published their results in the journal Nature Communications.

Research 2022
Polymer AM Market Opportunities and Trends

741 unique polymer AM companies individually surveyed and studied. Core polymer AM market generated $4.6 billion...

Edward Wakefield

Edward is a freelance writer and additive manufacturing enthusiast looking to make AM more accessible and understandable.

Related Articles

Back to top button

We use cookies to give you the best online experience and for ads personalisation. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!