3D Printed FootwearConsumer ProductsIndustry Analysis

My latest report on footwear AM 2020 is out: market to reach $9 billion in 2030

Goal to produce 70 million footwear parts yearly

We tend not to write articles in the first person on 3D Printing Media Network, however, I will make an exception in this case, as I’m writing about my latest project: the new edition of my study on footwear additive manufacturing, which was just published by SmarTech Analysis. In this new footwear AM 2020 report, I looked at the latest trends in terms of hardware technologies, new materials and new applications of additive manufacturing for footwear serial, mass and mass customized production.

Thanks to contributions from some amazing companies and designers (Voxel8, voxeljet, ECCO/Quant-U, Prodways, Kings3D, and footwear designer Nolan Kim above all but many others as well), I found a segment that is extremely dynamic, with serious and commercially ready AM applications in midsoles, insoles and uppers, that have led me to forecast a total market that could near $9 billion in yearly revenues (including all AM hardware, materials and applications) by 2030.

Footwear AM

These contributions, together with extensive research, helped to further evolve my forecast mode, which I had already developed for the previous edition of this report (published just a little over a year ago). That first edition already went a long way into describing the market, its technological and some of its geographic trends. But a lot has happened since – even more than I had initially expected – and this new report reflects a much more “practical” and sustainable approach by many stakeholders in the AM and in the footwear segment.

In the report I provided a deep dive into the revenue opportunities offered by the global footwear segment, reflecting advances where 3D printing is impacting footwear production: prototyping, tooling and final parts. I also include an updated analysis of how AM hardware, AM materials, AM service and AM software are impacted by the evolving footwear industry scenario.

All key operators in this segment have been identified and classified, all major technologies and all AM material classes have been analyzed for their potential on footwear part production in order to assess the associated revenue opportunities from all angles. Among these, I profiled the key manufacturers involved in the 3D printed footwear revolution including (and not limited to): Carbon, voxeljet, HP, Voxel8, Kings3D, Formlabs, Stratasys, 3D Systems, EOS, Prodways, BASF, ECCO, German RepRap, Adidas, Nike, Reebok, New Balance, Under Armour, Timberland. I conducted extensive interviews with many of these key market innovators in order to provide this most up-to-date market scenario.

Voxeljet’s upcoming VX1000 HSS system – a massive planar PBF machine – will be able to serially manufacture footwear midsoles using the company’s Greyscale technology.

Some key findings:

WIthin the expected $9 billion revenues generated yearly by 2030, applications, in general, are the main revenue generation opportunity, with end-use parts representing nearly half of all footwear AM associated revenues by 2030. In a consumer business segment, applications have the opportunity to truly scale, if hardware will be able to support higher productivity. Photopolymerization – such as that used by Carbon and adidas on midsoles, but also for many tooling and molding applications  – remains the most relevant AM technology in the footwear industry and is expected to remain so for the foreseeable future and thus the entire forecast period. The reason why photopolymerization is so dominant in this segment is that it offers several different technological alternatives which cater to multiple key footwear applications.

The improved ability to effectively 3D print thermosets by extrusion technology may be one of the most significant new trends that have emerged and consolidated over the past year. However, as we saw in the previous chapter, the market for footwear AM is still—and is expected to continue to be—very much dependent on industrial vat photopolymerization and polymer powder bed fusion technologies. In both cases, the key materials for end-use applications are modified polyurethanes. In powder bed fusion the most widely used material is expected to be thermoplastic polyurethane (TPU).

ECCO’s Quant-U approach uses silicon material extrusion for 3D printing midsoles in specially developed products with a hollow-core, using relatively standard inlay soles.

Market dynamics for AM production via external 3D printing service providers in the footwear segment are constantly evolving. In the beginning—when the segment was almost entirely concentrated on custom insoles production, specialized “application-agnostic” AM service providers proved to be the primary solution for production requirements as they possessed the knowledge and the machine park to meet small-batch mass customization demands.

Finally, despite the considerable potential for 3D-printed footwear, there remain challenges. High volumes are possible in this business, but this fact also creates a need for automation in the “shoe factory of the future.” Also important is the need to fully exploit the geometric and performance benefits enabled by AM technologies. This will potentially involve the use of advanced CAD/CAE software. It is now possible to design optimized lattice structures for midsoles that can be effectively produced only by 3D printing. Now, production teams can create prototypes rapidly on-site for instant feedback, significantly streamlining the concept creation process. Additive manufacturing is transforming the overall design process for footwear.

Tags
Support great content
Help us bring you the AM insights that matter

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst for leading US-firm SmarTech Analysis, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he Co-founded London-based 3dpbm. Today the company publishes the leading news and insights websites 3D Printing Media Network and Replicatore, as well as 3D Printing Business Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services
Close
Close

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!