3D Printing ProcessesLegislationSustainability

MakerBot advances AM in the office with GREENGUARD certification

MakerBot Clean Air System with METHOD X achieves GREENGUARD certification with MakerBot ABS, PC-ABS, and Nylon materials

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

MakerBot, a Stratasys company, has informed that the MakerBot Clean Air System with METHOD X received GREENGUARD Certification from UL, a global safety science leader.

MakerBot received GREENGUARD Certifications for the MakerBot METHOD, MakerBot METHOD X, and MakerBot SKETCH 3D printers when printing with MakerBot Tough material, as well as the Clean Air System with METHOD X when printing with ABS, PC-ABS, and Nylon materials.

The Clean Air System, a dual-filtration smart-controlled system for the METHOD platform, addresses one of the biggest concerns with printing engineering materials in an office environment by providing an extra layer of protection against 3D printing emissions. Clean Air utilizes a best-in-class two-layer filtration system comprising a HEPA filter for protection against ultrafine particles (UFPs) and an activated carbon filter for protection against volatile organic compounds (VOCs) and odors. The system accounts for ambient conditions, chamber temperature, and model material, automatically maintaining METHOD’s print environment based on its surroundings. Clean Air’s smart-control features are integrated into METHOD’s workflow, creating a seamless 3D printing experience for users.

MakerBot has informed that the MakerBot Clean Air System with METHOD X received GREENGUARD Certification from UL

“Our goal with METHOD is to make 3D printing advanced engineering materials more accessible to engineers,” said Nadav Goshen, CEO, MakerBot. “Part of the challenge is to make it easier to print these materials in the office, home, and school. Getting the UL GREENGUARD Certification for the MakerBot Clean Air with METHOD X shows that we can reduce 3D printing emissions from materials well below the maximum levels, a major step towards improving the 3D printing process.”

Achieving GREENGUARD Certification for the Clean Air System with METHOD X is the latest in Stratasys and MakerBot’s ongoing initiatives that aim to support industry safety, sustainability, and compliance. The announcement comes on the heels of MakerBot’s recent launch of MakerBot RapidRinse™, a fast-dissolving water-soluble support material that removes the need for caustic chemicals and additional equipment during post-processing. METHOD and SKETCH 3D printers are equipped with features that help to ensure safer 3D printing usage, including enclosed build chambers designed to prevent access to the build plate while printing is in motion. SKETCH also includes a built-in particulate filter, making it ideal for 3D printing in classrooms.

MakerBot has informed that the MakerBot Clean Air System with METHOD X received GREENGUARD Certification from UL

GREENGUARD Certification is an internationally recognized product emissions certification and labeling program for manufacturers of low-emitting indoor products, furnishings, and materials. Products that have achieved GREENGUARD Certification by UL are scientifically proven to meet some of the world’s most rigorous, third-party chemical emissions standards.

The Clean Air System with METHOD X was tested for UFPs and VOCs in a controlled exposure chamber, according to ANSI/CAN/UL 2904.1. Findings from additional research tests showed that UFPs were reduced up to 100% and total VOCs were reduced up to 64%. Specific chemicals of health concern when printing ABS materials showed a significant reduction in emissions with Clean Air. All chemicals of concern also had emission rates and estimated office concentrations below recommended levels.

Research 2021
Ceramic AM Market Opportunities and Trends

This market study from 3dpbm Research provides an in-depth analysis and forecast of the ceramic additive ma...

Andrea Gambini

Andrea has always loved reading and writing. He started working in an editorial office as a sports journalist in 2008, then the passion for journalism and for the world of communication in general, allowed him to greatly expand his interests, leading to several years of collaborations with several popular online newspapers. Andrea then approached 3D printing, impressed by the great potential of this new technology, which day after the day pushed him to learn more and more about what he considers a real revolution that will soon be felt in many fields of our daily life.

Related Articles

Back to top button

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services



Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*