AerospaceCeramics Additive ManufacturingIndustrial Additive ManufacturingMass Production

LEAP Jet Engines with 3D printed parts dominate Paris Air Show with orders for $31 Billion

GE and its partners have received more than $31 billion in new business at the show, which opened Monday. The bulk of those orders are for a new family of LEAP jet engines with 3D printed fuel nozzles. The LEAP engine was developed by CFM International, a 50-50 joint venture between GE  and France’s Safran Aircraft Engines. CFM has received orders for 1,658 LEAP and other engines valued at $27.3 billion. This brings the total orders for the LEAP engines to more than 14,000, up from 12,500 before the show.

“This air show has far surpassed all of our expectations,” said CFM President and CEO Gaël Méheust.

CFM developed the LEAP for the next generation of single-aisle aircraft like the Airbus A320neo, Boeing 737 MAX and China’s COMAC C919. This is the fastest-growing segment of the booming aviation market. The trade group International Air Transportation Association (IATA) estimates that global passenger volume will grow by 7.4 percent in 2017 and that the number of planes will increase by 3.8 percent. The typical aircraft today is also more than 80 percent full on average. IATA projects total airline profits at $30 billion this year.

Planes powered by LEAP engines entered service last year and have already carried more than 5 million passengers of airlines like AirAsia, easyJet, Frontier, WOW air, SAS, Azul, or Virgin America. They should help airlines add to the bottom line. Each engine holds up to 19 3D printed fuel nozzles, which help improve its efficiency by as much as 15 percent. This is a huge deal considering that the engines will remain in service for decades.

The nozzles rely on a complex internal geometry that allows them to mix and inject fuel in the engine efficiently. But the structure is so intricate that 3D printing is the only practical way to mass-produce them. “We tried to cast it eight times, and we failed every time,” says Mohammad Ehteshami who runs GE Additive, a new GE business dedicated to supplying 3D printers, materials and engineering consulting services.

The LEAP engines also contain parts from other new materials that include “super ceramics.” These materials, called ceramic matrix composites, are as tough as metals, but they are also one-third as heavy and can operate at 2,400 degrees Fahrenheit. That’s 500 degrees higher than the most advanced alloys. This combination allows engineers to design lighter components for engines that require less cooling air, generate more power and burn less fuel. “This is a huge play for us,” says GE Aviation’s Sanjay Correa, who was involved in the engine’s development.

The LEAP’s fuel nozzles rely on a complex internal geometry that allows them to mix and inject fuel in the engine efficiently. But the structure is so intricate that 3D printing is the only practical way to mass-produce them. Image credit: CFM International.
The 69 Airbus and Boeing planes with LEAP engines currently in service fly on average for more than 10 hours a day, achieving 96 percent utilization, another important airline metric.

“An airplane in service is an airplane making money,” says Allen Paxson, the executive vice president of CFM.

Airlines can work the engines so hard in part because the company is using a “digital thread” to collect and analyze data spanning development, production and service. GE says that apps running on Predix, the company’s software for the industrial internet, are already monitoring some 35,000 jet engines. Software helps better predict when individual engines need service, among other things.

As a result of these technologies, LEAP engines are the perfect triple play for anyone who flies and operates an airline: It’s good for the bottom line and good for the environment, and it can help lower ticket prices.

Davide Sher

Since 2002, I have built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, I spent 12 years in the United States, where I received my Bachelor of Arts undergraduate degree. As a journalist covering the tech industry - especially the videogame industry - for over 10 years, I began covering the AM industry specifically in 2013, as blogger. In 2016 I co-founded London-based 3D Printing Business Media Ltd. (now 3dpbm) which operates in marketing, editorial, and market analysis & consultancy services for the additive manufacturing industry. 3dpbm publishes 3D Printing Business Directory, the largest global directory of companies related to 3DP, and leading news and insights websites 3D Printing Media Network and Replicatore. I am also a Senior Analyst for leading US-based firm SmarTech Analysis focusing on the additive manufacturing industry and relative vertical markets.

Related Articles

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services



Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*