3D Printing Processes

EROFIO Group 3D prints first part on GE Additive Concept Laser M Line

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

EROFIO Group, an industrial molding sector company and long-standing user of GE Additive’s DMLM laser technology, was selected to test and put the GE Additive Concept Laser M Line through its paces ahead of its commercial readiness later this year.

Less than three months since receiving and installing an M Line system at its 6,500m2 mold-making facility in Batalha, central Portugal, a team led by EROFIO Group’s metal additive manufacturing leader, Luís Santos has successfully 3D-printed its first Mold Core. The Core was manufactured using M300 hot work tool steel – a material often used for the production of injection molding and die-casting tool inserts with conformal cooling, as well as functional components. The Core contains more than eight independent, internal conformal cooling channels, stretching over eight meters in length and between five to eight-millimeter in diameter.

Additively manufacturing the part affords the team the design freedom to enable conformal cooling to create a more efficient heat exchange. This improved cooling will increase the overall plastic injection process productivity through decreased cooling cycle time and warpage, and the improvement of the injected plastic part aesthetics.

“We are honored to be part of GE Additive’s thorough commercial readiness process. We’re learning a lot from them and I think it’s safe to say they are learning a lot from us and our first impressions working with the M Line. Having the first part come off our system is a great milestone and we’re looking forward to supporting the wider team as the solution comes to market and beyond,” said Luís Santos, EROFIO Group.

EROFIO Group, an industrial molding sector company and long-standing user of GE Additive’s DMLM laser technology, was selected to test and put the GE Additive Concept Laser M Line through its paces ahead of its commercial readiness later this year.

In addition to the benefits of geometric freedom on the design of inner channels, using additive manufacturing has reduced finishing requirements by 90%. Another advantage identified, when compared with conventional manufacturing processes, was a reduction in the total manufacturing time — from powder to mold assembly — by 30%.

“We have a solid working relationship with the team at EROFIO that goes back well over a decade. As we near a critical phase in commercializing the M LINE system, we specifically sought out a trusted partner to gain early installation experience, data, and honest customer feedback,” said Wolfgang Lauer, Concept Laser M Line Product Manager, GE Additive.”

Santos and his team already experienced users of GE Additive’s Concept Laser M2 system, opted for an existing parameter – already developed for the Concept Laser M2 Series 5 – and made only very minimal changes in order to adapt it for the M Line system. Following remote optimization support from the GE Additive team in Lichtenfels, the part was successfully printed on its first attempt, over a six-day period in May 2021.

“We fully expected the first part to be printed on the M Line to go well. And when it did there was a rush of excitement felt across the entire team here in Lichtenfels. Work continues here in Germany on the M Line, ahead of the launch, and we will factor in additional feedback from the team at EROFIO,” said Jan Siebert, General Manager, laser technologies, GE Additive.

“It is critically important that when GE Additive brings new solutions to market, it can tangibly and immediately demonstrate business impact. Our M Line system operates at higher levels of reliability and repeatability, meeting customers’ needs from day one. This is not a science experiment and we are not developing laboratory equipment. Overly ambitious claims and incomplete specifications in other vendors’ product launch announcements only serve to undermine the trust that our wider industry has collectively built-in metal additive technology in recent years”, he added.

Research 2021
Ceramic AM Market Opportunities and Trends

This market study from 3dpbm Research provides an in-depth analysis and forecast of the ceramic additive ma...

Andrea Gambini

Andrea has always loved reading and writing. He started working in an editorial office as a sports journalist in 2008, then the passion for journalism and for the world of communication in general, allowed him to greatly expand his interests, leading to several years of collaborations with several popular online newspapers. Andrea then approached 3D printing, impressed by the great potential of this new technology, which day after the day pushed him to learn more and more about what he considers a real revolution that will soon be felt in many fields of our daily life.

Related Articles

Back to top button

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!