Home / Consumer / Electrolux Asia Pacific and Spare Parts 3D Explore 3D Printing for Replacement Parts
Spare Parts 3D

Electrolux Asia Pacific and Spare Parts 3D Explore 3D Printing for Replacement Parts

The Asia Pacific sector of the Swedish multinational home appliance manufacturer Electrolux recently partnered with Spare Parts 3D, a young Singapore-based tech start-up to conduct a feasibility study that aims to evaluate the on-demand and distributed production of spare parts.

Traditional Spare Parts Strategies Incurs Avoidable Costs

To support aftersales maintenance and repair, most big manufacturers keep stock of spare parts long after production of the corresponding appliances has ceased, a common after-sales service, often at the expense of high inventory costs. Not only do parts need to be kept in warehouses which generate labor cost and maintenance cost, some parts stay in the warehouse for a very long time and end up being scrapped. Additionally, production costs increase significantly when the parts can no longer be supplied through high-volume production site.

For long tails, manufacturers usually warehouse parts centrally in factories or distribution centers. It could take weeks to ship the parts from distribution centers to the end consumer. Keeping inventories in regional warehouses to shorten the delivery time is one solution but that implies higher labor and maintenance costs.

3D printing has the potential to become a solution to minimising inventory costs and delivery lead time.

Major Players in Appliances Sector Explore 3D Printing for Spare Parts

As the technology matures, Electrolux Asia Pacific is looking at the advantages of 3D printing as a way of reducing inventory and improving efficiency. The logic behind this is simple: 3D printing can potentially allow Electrolux to produce parts on-demand, and close to the demand points through a network of 3D printing service providers, such as one powered by Spare Parts 3D. This strategy implies zero physical inventory and rapid shipment at the same time.

To test the feasibility, Electrolux Asia Pacific teamed up with the Singapore-based tech start-up Spare Parts 3D to perform technical and economical assessments. The study consists of five steps.

  1. Catalogue Selection: Spare Parts 3D will define the right criteria for 3D printing and select the best business case for Electrolux Asia Pacific to maximize savings without extra investment. Two critical dimensions are 1. 3D printability – only certain kinds of spare parts are 3D printable, and 2. Profitability
  2. Industrialisation: To optimize economic benefits, Spare Parts 3D will conduct industrial engineering, to identify the best materials and the most efficient production parameters.
  3. Digitalisation: A digital inventory containing the best production parameters for each selected reference.
  4. Qualification: Quality tests and checks on the final prints.
  5. Profitability Analysis: Comparison of costs incurred when 3D printing spare parts and when produced through traditional means.

The Future of Spare Parts Lies in 3D Printing

3D printing technology is believed to be a strong complement to traditional manufacturing techniques. Spare parts management is bound to be disrupted by the proliferation of 3D printing. Using a global network of 3D printers that produces and delivers standard spare parts on-demand, manufacturers can eliminate physical inventory and reduce transportation to the last mile. A recent report by PricewaterhouseCoopers has predicted that the future of spare parts is 3D, and within five years, more than 85% of spare parts suppliers will incorporate 3D printing into their business because 3D printing will enable suppliers to increase the availability of spare parts, reduce lead time, and decrease costs.

3D Printing Business Directory

About 3D Printing Media Network

3D Printing Media Network is the editorial branch of 3D Printing Business Directory. It was set up to provide the latest industry news and opinions to a global audience of professionals.

Check Also

GE Additive Unveils First BETA Machine from Its Project A.T.L.A.S. Program at formnext

Share12 Tweet Share10 Buffer EmailShares 22 GE Additive today unveiled the first BETA machine developed …

Leave a Reply

Your email address will not be published.