Sustainability

Can AM help fight climate change with a more sustainable production?

How additive manufacturing can find its place during the sustainability and energy transitions

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

The risks of climate change now need little introduction. We are already starting to live with the impacts of a changing climate on communities, businesses and supply chains. The most recent Intergovernmental Panel on Climate Change (IPCC) report delivered the unnerving news that the world is likely to overshoot the critical 1.5oC mark by 2030, exposing many of us to potentially serious impacts to our way of life. In the face of global warming and climate change, companies are becoming increasingly aware that they must rethink their business practices and pursue more sustainable production methods.

Today there is an increasing understanding that financial profitability needs to go hand-in-hand with environmental integrity.

When it comes to manufacturing, sustainability refers to the production and fabrication of manufactured products through economically sound processes that minimize negative environmental impacts while conserving energy and natural resources.

However, implementing sustainability principles in manufacturing is a complex challenge, forcing companies to confront dilemmas and make decisions with conflicting objectives and values.

More sustainable production practices

Additive manufacturing can build complex components that would typically be very challenging, if not impossible, with more traditional subtractive manufacturing methods. The advantages of additive manufacturing are numerous – including greater design freedom and customization, improved product strength and functionality, reduced assembly time for complex components, localized production, rapid time to market, mitigation of wastage, reduced obsolescence, decreased reliance on traditional suppliers and even the creation of new materials with unique mechanical and behavioral properties.

In addition to all these advantages, despite the technology being at a relatively early stage of adoption, it is also showing signs of delivering potential environmental benefits.

Can AM help fight climate change with a more sustainable production?
Workers in airplane hangar

With some already claiming it as a green technology[1], additive manufacturing holds significant potential to decrease the volume of natural resources typically utilized; increase materials efficiency; reduce stock obsolescence and material waste; improve functionality and extend product life; enable ease of access to spare parts; reduce the weight of key components; mitigate the need for special tooling in part fabrication and reduce emissions through less transportation required.

Light-weighting is for many manufacturers – particularly those in the transportation industries – an ultimate goal to reduce fuel consumption and in turn, reduce their carbon footprint to pursue a more sustainble production approach. Additive manufacturing allows for the design of considerably lighter components, as well as enabling several components to be integrated into a single part, so potentially reducing the total number of parts required to be welded together at the assembly stage. It also allows for highly innovative designs of parts with greater functionality that can often be too intricate to be cast. Some of the most advanced engine parts aimed at significantly reducing weight and fuel consumption can now be successfully produced thanks to additive manufacturing.

The more complex a printed part, the more advantageous it is to use additive manufacturing, as the cost and energy for printing is not dependent on component complexity[2]. Components can also be redesigned to provide additional functionality – for example, improved cooling by integrating cooling channels into the structure to enhance energy efficiency and performance of the entire product. Specialized parts can be produced quickly and on-demand, enabling more or less immediate access to spare parts for repairs which can not only extend the life of a product but can mitigate the need for extensive storage and inventory[3] – all of which needs space and energy to become operational. And if printing takes place on-site, with no transportation needed, emissions from vehicles can also be avoided. Furthermore, an additive rather than a subtractive approach to manufacturing means that more of the resource material will end up in the printed part, so reducing material waste[4]. When the greatest share of a product’s environmental impact comes from producing its feedstock, minimizing its waste is critical.

It is estimated that the amount of feedstock waste created by subtractive manufacturing could be reduced by as much as 90% using an additive manufacturing method.[1]  In addition to feedstock waste, conventional manufacturing also consumes other resources such as coolants, lubricants and tooling which are not needed for additive manufacturing. All these are key elements that can help implement sustainable production methods and help to contrast climate change, today and in the future.

However, this does not mean that additive manufacturing generates no waste at all. This includes, for example, some material powders that are no longer recyclable, scraps generated by unexpected defects and the support structures created for printing components with overhanging parts.

The fly in the printing chamber

The biggest potential drawback to additive manufacturing not achieving its full potential as a more sustainable production method is energy usage – both in the type and volume of energy it consumes. To achieve the future potential environmental benefits it is important that the process benefits as much as possible from the energy transition to renewable power. In order to fight climate change, the developed world has a goal to achieve Net Zero by 2050 and while policies, incentives and sustainability initiatives are largely in place, the delivery of a fully renewable electrified industrial environment is still some way off.

In the interim, however, it will be important to try to minimize the number of current energy sources used to support the additive manufacturing process. One activity to help manage energy consumption that can be implemented relatively quickly is to ensure the additive manufacturing process itself is optimized, thereby mitigating potential re-starts and re-work in the event of defective parts.  There are several aspects to the process that once enhanced, can help prevent false starts. While no one solution can claim to make additive manufacturing more sustainable than traditional production methods, through a combination of technologies – particularly associated to the use of atmospheric gases – the process can be assured to have more reliable, repeatable quality outcomes.  Once this is achieved, the advantages of additive manufacturing are, at the very least given the potential to contribute to more sustainable production methods.

Printing time = energy consumption

The success of any additive manufactured process can be determined by the mechanical properties of a finished product. When those properties are below par, resource material wastage and re-work are normally the results. And when wastage and re-work are required, more energy is consumed than is optimally required.

The properties of any perfectly printed part are not only highly dependent upon the printing process itself, but the characteristics of the feedstock. This is especially the case when using metal powders in laser powder-bed fusion (L-PBF), for example. The quality of metal powders used is critically important as it can impact the physical and chemical properties of the finished product, including tensile strength, brittleness, impact resistance, heat tolerance and resistance to corrosion. Powder quality also plays a vital part in consistency and production repeatability.

Can AM help fight climate change with a more sustainable production?

High sphericity of the metal particles is needed so that the metal powder flows smoothly and evenly inside the printer and gas atomization is the most effective approach to metal powder production due to the superior geometrical properties achieved. It requires not only a large supply of inert gases such as argon and nitrogen, but the gas molecule expertise to help manufacturers fine-tune the atomization process to further improve powder characteristics and eliminate rejects. Additionally, to protect the melt during atomization, blanketing with liquid argon will protect the metal powder from oxidization, reducing scrap and the need for expensive crucible maintenance. When considering these various gas atomization applications, it is important to work with a specialized partner, such as Linde, with extensive know-how in high-pressure gas supply solutions.

The choice of gas and the supply mode are also crucial ingredients to the success of your process and can affect the atomizing flow and melt rates, pressure and overall batch time – impacting on both quality and productivity.

The ADDvance powder cabinet works with moisture control and monitoring unit to continuously measure humidity levels, triggering a high-volume purge gas flow as soon as the doors are closed to rapidly remove moisture in the air.

Once the metal powders have been produced, it is essential to maintain the correct atmosphere during their storage in order to avoid humidity. While this is less important when powders are first delivered in their hermetically sealed packaging, once opened, the powder can be at risk of exposure to oxygen which can age the powder, reducing its quality or rendering it unusable.  Linde has developed an innovative and very compact solution to resolving this storage challenge – the ADDvance powder cabinet. The powder cabinet works with moisture control and monitoring unit to continuously measure humidity levels, triggering a high-volume purge gas flow as soon as the doors are closed to rapidly remove moisture in the air. It then applies a lower stream of gas to ensure a consistently low level of humidity, ensuring the quality of the valuable, sensitive metal powders is retained.

Beyond metal powder storage optimization, atmospheric gases play an even more important role in the core printing process.

While additive manufacturing can optimize the sustainable production of printed parts, ensuring high-quality repeatability of the process and requiring less post-print finishing, the atmosphere in the printing chamber needs to be optimal and reproducible.

Although the atmosphere in the chamber is purged with high-purity inert gases such as argon and nitrogen to rid it of oxygen, impurities can still remain present due to incomplete purging, via loose connections or even within the metal powder itself. Even extremely small variations in oxygen content can impair the mechanical or chemical properties of metals sensitive to oxygen – such as titanium and aluminum alloys – and can affect the composition of the end product resulting in negative physical characteristics such as discoloration and even poor fatigue resistance.

Linde is dedicated to developing pioneering technology to overcome these atmospheric impurities in order to give manufacturers optimal printing conditions. The result – ADDvance O2 precision – provides continuous analysis of the gas atmosphere, detecting oxygen levels with high precision without cross-sensitivity. Recognizing O2 concentrations as low as 10 parts per million (ppm), the unit automatically initiates a purging process to maintain the atmosphere as pure as needed.

Linde is also a leader in the research, development and supply of bespoke gases uniquely tailored to a customer’s specific AM process and project application, such as its advanced argon-hydrogen mixture, ADDvance Sinter250, to optimize atmospheric conditions in sintering furnaces and its most recent argon-helium test mixture to optimize the production of complex, latticed parts during L-PBF.

The climate change end game

In a global effort to counter climate change, as we shift from conventional manufacturing methods to additive manufacturing, we also need to shift from a linear to a circular economy. Although waste from additive manufacturing is significantly less than from subtractive manufacturing methods, it still generates some waste. This is now being addressed by innovative start-ups developing processes for melting and atomizing scrap metal into suitable metal powders which can be re-used. It is thought that, in principle, these small recycling facilities could be distributed across the globe, situated in additive manufacturing hubs to give scrap metal new life as additive manufacturing feedstock.

While it may be a coincidence that these two major manufacturing themes have emerged and become key concerns independently of each other, it is clear that given the opportunity to coalesce, they present a significant ability to reinforce each other’s potential. As demand for more sustainable products continues to grow, the manufacturing landscape must adapt. As additive manufacturing becomes increasingly scalable, more localized, resource-efficient and circular, it is not impossible for it to make a significant contribution to the sustainability agenda in the not-too-distant future.

*3dpbm has covered the topic of sustainability in additive manufacturing in-depth in its yearly AM Focus Sustainability eBook issues, available free to view online or download as a PDF. Click to download the AM Focus 2020 Sustainability eBook and the AM Focus 2021 Sustainability eBook. Contact us to participate in the upcoming AM Focus 2022 Sustainability eBook.

[1] Bechmann; 2014; Changing the future of additive manufacturing, Metal Powder Report; issue 69; pages 37–40; and Reynder; 2014; 3D Printers Create a Blueprint for Future of Sustainable Design and Production; The Guardian.
[2] Quinlan et al; 2017; Industrial and consumer uses of additive manufacturing: a discussion of capabilities, trajectories, and challenges; J. Ind. Ecol. 21 (S1), S15eS20
[3] Jamshidinia et al; 2015; Environmental assessment of additive manufacturing in the automotive industry; Journal of Clean Production; Elsevier
[4] Nyamekye; 2015; Energy and Raw Material Consumption Analysis of Powder Bed Fusion – Case Study: CNC Machining and Laser Additive Manufacturing; Lappeenranta University of Technology, Lappeenranta, Finland

Research 2021
Ceramic AM Market Opportunities and Trends

This market study from 3dpbm Research provides an in-depth analysis and forecast of the ceramic additive ma...

Pierre Forêt

Pierre Forêt is Head of Additive Manufacturing at Linde and is a leading expert in gas technologies to optimize the additive manufacturing process. He joined Linde in 2009 and now oversees Research & Development for Additive Manufacturing in Munich, leading a dedicated team developing innovative solutions to overcome the challenges faced by this evolving manufacturing method. Pierre is a French national and holds an MSc in Material Science from Ecole Européenne d’Ingénieurs en Génie des Matériaux (EEIGM), France.

Leave a Reply

Your email address will not be published.

Back to top button

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!