3D Printing ProcessesMicro 3D printingProduct Launch

BMF introduces microArch S230: the microscale 3D printer

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Boston Micro Fabrication (BMF), the pioneer in microscale 3D printing systems, today unveiled the 3D printer microArch S230, the latest addition to its roster of industrial-grade micro-precision 3D printers. This next-generation version of BMF’s highest resolution system is designed for applications that require ultra-high resolution prints (down to 2μm) with accuracy, precision, and speed.

The microArch S230 brings unprecedented design freedom and part resolution to researchers and manufacturers needing micro parts with tight tolerances for prototyping through production. The printer is built upon BMF’s patented Projection Micro Stereolithography (PµSL) technology, a technique that allows for rapid photopolymerization of an entire layer of liquid polymer using a flash of UV light at the micro-scale resolution, but with a larger built volume (50x50x50mm) and up to 5 times faster prints than previous models in the 2μm series.

BMF introduces microArch S230: the microscale 3D printer
the microArch S230

Additional key features of the microArch S230 include active layer leveling, automated laser calibration, and the capacity to handle higher molecular weight materials with viscosities of up to 20,000 Cp, resulting in the production of stronger functional parts. The printer is compatible with a growing portfolio of engineering and ceramic resins suitable for end-use parts, including three new materials being announced with today’s launch:

AL (Alumina) Ceramic, a biocompatible and chemical-resistant ceramic resin meant for high temperature, high strength, and high stiffness applications such as tooling (injection molding), casing and housings, and medical devices. HT 200, a durable, high-temperature, and high-strength resin that can be soldered, and designed for end-use in electrical connectors and electrical components; and the MT (Magnesium Titanate) Ceramic, the combination of high dielectric constant and low dielectric loss make MT Ceramic suitable for millimeter-wave applications such as antennas, waveguides, and other electronic components.

“As a current BMF customer, we’ve been thrilled with the performance of our microArch S130 to support our work in micro-printing ceramics – providing the resolution, accuracy, and precision necessary for our parts. As the first customer of the new microArch S230, the next generation 2µm system, we are excited to utilize the enhancements of the platform to increase our part capacity with the larger build volume and speed up our printing times. We are looking forward to continuing to work with the BMF team and their line of micro-precision 3D printers to support our micro part needs”, said Toby Schaedler, Manager, Architected Materials and Structures Department at HRL Laboratories, LLC.

BMF introduces microArch S230: the microscale 3D printer

BMF launched its microArch system globally in February 2020, just weeks shy of the pandemic, and has installed over 125 units around the world. Demand continues to skyrocket as the superior production of intricate, exact, and replicable parts makes PµSL optimal for end-use and prototyping use cases across industries that were once left out of the additive manufacturing landscape, including medical device manufacturing, microfluidics, MEMS, biotech, and pharmaceuticals, electronics and electrical connectors, and research and development.

“The miniaturization trend continues to dominate nearly every industry, but as parts get smaller, they become harder to design, more expensive to manufacture, and generally more complicated to put into production. Not to mention, technological barriers had previously made additive manufacturing out-of-reach for most use cases requiring small parts” said John Kawola, CEO of BMF. “We changed that notion and brought 3D printing to industries that once deemed it impossible, and this new addition to our portfolio – the most advanced of our highest-resolution printers yet – will open even more doors for new applications on the smallest scale.”

Research 2021
Ceramic AM Market Opportunities and Trends

This market study from 3dpbm Research provides an in-depth analysis and forecast of the ceramic additive ma...

Andrea Gambini

Andrea has always loved reading and writing. He started working in an editorial office as a sports journalist in 2008, then the passion for journalism and for the world of communication in general, allowed him to greatly expand his interests, leading to several years of collaborations with several popular online newspapers. Andrea then approached 3D printing, impressed by the great potential of this new technology, which day after the day pushed him to learn more and more about what he considers a real revolution that will soon be felt in many fields of our daily life.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!