3D Printer HardwareFigure 4MaterialsMedical Additive ManufacturingSoftware

3D Systems heads toward production with Figure 4 and the world’s fastest time-to-part

This week at RAPID + TCT 2018, 3D Systems is showcasing its portfolio of industry-leading solutions that are helping manufacturers move from prototyping to production and realize competitive advantages. One such platform designed for production is Figure 4 Production and Figure 4 Standalone – the fastest, most accurate 3D printing technology available. Recently released data on Figure 4 Production highlights part print speeds up to 65mm/hr, with prototyping speeds of up to 100 mm/hr. The Figure 4 platform delivers part accuracy and repeatability, with Six Sigma repeatability (Cpk > 2) across all materials. The combination of speed and accuracy complemented by a light-based UV curing process that takes minutes versus hours with heat-based curing processes yields the world’s fastest additive manufacturing throughput and time-to-part.

Figure 4 enables high-speed digital molding, a process that complements traditional production methods, providing manufacturers the accuracy, reliability, repeatability and uptime of traditional molding, producing parts without the costs and time-consuming aspects of tooling. Digital molding is completely scalable, and with the high surface quality available on Figure 4, excels at fine part texturing. In comparison to conventional manufacturing, part texturing is essentially free and applicable to any surface no matter the shape.

In addition to supporting long- and short-run batches, high-speed digital molding allows different parts to be produced in the same batch. This gives manufacturers the ability to quickly iterate a design or manufacture end-use parts without regard to a minimum order quantity.

The company is also announcing over 30 materials for Figure 4 Production including Figure 4 RGD-BLK 10, a durable material for rigid, load-bearing applications, as well as production parts for automotive and durable goods applications; Figure 4 RGD-GRY 10, a high-speed material for rapid design iterations providing up to 100 mm/hr build speed; strong, rigid Figure 4 RGD-GRY 15 for production applications; elastomeric Figure 4 ELAST-BLK, a black material for iteration and design verification of flexible parts; and Figure 4 JCST-GRN, a castable green material optimized for investment casting of jewelry patterns.

Figure 4 Production is compatible with 3D Systems’ entire portfolio of NextDent resins to facilitate full customization of dental devices, as well as an Orthodontic Tooling resin. Figure 4 Production customers also have the option of collaborating with 3D Systems’ engineers to create unique resins specifically designed for their application. Custom configuration pricing offers both low Total Cost of Operation (TCO) and low per part cost.This event marks the first time that attendees have the opportunity to experience Figure 4 Production and Figure 4 Standalone in-person. Earlier this year at LMT Lab Day Chicago 2018, 3D Systems unveiled the NextDent™ 5100 – powered by Figure 4 technology – which facilitates high-speed 3D printing of dental devices and fixtures.

General availability for Figure 4 Standalone is planned for Q3 2018 and will be priced below $25,000. Manufacturers interested in Figure 4 Production can collaborate with the company’s Production Printer Team to configure a solution customized to their business needs.

“At Rapid+TCT, 3D Systems continues to deliver on its promise to ‘Make 3D Production Real.’  We are showcasing key print technologies and supporting materials, giving designers and manufacturers a migration path from entry level additive manufacturing solutions to full, automated configurations that support Industry 4.0. This is only made possible by the decades of accumulated expertise our engineers and scientists bring to the industry. It is through their knowledge and passion that 3D Systems is helping organizations redefine their design, manufacturing and supply chain models.”

Vyomesh Joshi, president and chief executive officer, 3D Systems.

Revolutionizing Plastics Production

For manufacturers needing to produce larger parts with superior durability and finishing, the company is pleased to announce the general availability of the ProX SLS 6100. The next-generation printing platform enables customers to seamlessly scale from functional prototyping to low volume functional production parts. By combining the printer, new materials, software and cloud-based services, this new solution addresses the majority of the plastic prototyping and production needs of the automotive, durable goods, and healthcare industries as well as satisfying specific needs for aerospace interior cabin parts. The ProX SLS 6100 also delivers larger parts than small-frame systems, industry-leading TCO and is aggressively priced against similar printers in its class. 3D Systems offers a strong portfolio of Nylon materials to complement this new selective laser sintering printer. These include six materials in Nylon 11 and Nylon 12, with white, black, aluminum-filled, and glass-filled to serve a variety of aerospace, automotive and medical applications for both prototyping and production. Also available are DuraForm PA, with USP Class VI as well as FDA certification for food safety, and DuraForm FR1200 is FAR compliant to meet aerospace regulations on flame retardancy.

3D Systems Rapid 2018

The ProX SLS 6100 solution incorporates production-grade materials, 3D Sprint software, and 3D Connect capability for cloud-based monitoring services to address prototyping and production needs. The complete solution of materials, technology and software combined with a competitive initial purchase price delivers a 20% lower TCO over similar printers. The ProX SLS 6100 is available as part of a complete turn-key solution for less than $300,000.

For companies looking for an entry-level industrial 3D printing solution, 3D Systems is announcing late May 2018 planned general availability of the FabPro 1000, ideal for low-volume small part prototyping and production. The FabPro 1000 – which includes the company’s 3D Sprint software – creates precise, high-quality parts at up to three-times-faster throughput compared to competing systems. The entry-level industrial printer is launching with three new materials: FabPro Tough BLK is a durable plastic material for producing black parts for functional prototyping and production parts; FabPro Proto GRY is a fast, general purpose plastic material ideally suited for industrial applications; FabPro JewelCast GRN is a green material ideal for small, finely featured jewelry master patterns and for gypsum investment casting applications.

The FabPro 1000 completed beta testing to very positive reviews. Scott Young, engineering manager, Bastech, Inc. commented, “The FabPro 1000’s speed allowed me to build parts and finish them in the same day, and the surface quality rivals what I’ve seen on more expensive technologies. Changing materials was also easy compared to other systems – it is as simple as replacing the print tray and adding a new material.”

Improved Quality Control for Metal Parts

In addition to its 3D printing solutions for Plastics, 3D Systems offers a full line of solutions for metal additive manufacturing. Today, the company is launching DMP Monitoring, which equips users with a toolset for enhanced quality control for its Direct Metal Printing technology. DMP Monitoring provides technicians real-time data collection and analysis to optimize build parameters and produce higher quality parts. Over time, this enables reduced waste, improved productivity, and lower TCO. Additionally, the ability to archive photos and images to support process traceability and documentation for highly regulated industries such as aerospace and healthcare.

3D Systems Rapid 2018
3D System’s Factory of the Future concept

3D Systems developed DMP Monitoring based on its extensive expertise gained from producing more than 500,000 metal parts annually in its global Customer Innovation Centers. The toolset combines DMP Vision and DMP Meltpool to capture images of the powder bed and the meltpool to highlight areas of interest for further exploration. DMP Monitoring is currently available for 3D Systems’ ProX DMP 320 printers. It will be included with the company’s DMP 8500 Factory Solution when it becomes generally available later in 2018.

New Streamlined Workflow for Organic Design

Software is an important component of 3D Systems’ solutions that helps manufacturers redefine their workflows and move from prototyping to production. At RAPID+TCT 2018, 3D Systems will demonstrate the recently announced integration between leading 3D scanner manufacturer Artec and Geomagic Freeform®. Artec scanners can now be ordered with Geomagic Freeform software, which features a rich set of organic 3D engineering hybrid modeling tools. Designers can scan models and textures directly into Freeform to complete their design, streamlining the workflow and facilitating the design of orthopedic and prosthetic devices as well as innovative consumer products, original artwork and jewelry with fine, intricate details.

 

Tags

3D Printing Media Network

3D Printing Media Network is the editorial branch of 3D Printing Business Directory. It was set up to provide the latest industry news and opinions to a global audience of professionals.

Related Articles

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies allow us to count visits and traffic sources, so we can measure and improve the performance of our site.

We track anonymized user information to improve our website.
  • _ga
  • _gid
  • _gat

We track anonymized user information to improve our website.
  • BizoID
  • UserMatchHistory
  • bcookie
  • lang
  • lidc
  • join_wall
  • RT

Decline all Services
Accept all Services
Close
Close