Construction 3D PrintingSustainability

3D printed tiny house is the first of its kind in Europe

Built by COBOD customer 3DCP Group, using low-cost real concrete for roof and foundation

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Danish 3D construction printing company, 3DCP Group, recently unveiled their 3D printed tiny house located in Holstebro, Denmark, designed and fabricated to be as affordable as possible. On just 37 m2 the building contains a bathroom, an open plan kitchen, a living room, and a bedroom. To save space, the bedroom was placed on a mezzanine floor above the bathroom. In line with Nordic building traditions wood is characterizing the interior.

The house is shaped in a triangular circle connected by an open middle core. At each end of the triangle, you find the kitchen, the living room, and the bathroom. To accommodate the bedroom on top of the bathroom, the roof above the end of the triangle with the bathroom and bedroom has been levitated.

3D printed tiny house is the first of its kind in Europe, built by COBOD customer 3DCP Group, using low-cost real concrete

Architect Sebastian Aristotelis from Saga Space Architects who designed the 3D printed tiny house said: “Our task was to make a small housing unit for students, which should contain all the rooms and functionalities of a normal house, but be so low cost, that even students could afford to live in it. We solved the task by making a design which provides very effective use of each square meter still giving the inhabitants the feeling of being in a much larger house by having a large open area in the middle.”

3DCP Group decided to use COBOD’s BOD2 3D construction printer for the execution. Not only can the printer make unusual shapes, but it can also print with real concrete for a low cost and help to make the roof and the foundation.

3D printed tiny house is the first of its kind in Europe, built by COBOD customer 3DCP Group, using low-cost real concrete

Mikkel Brich, CEO of 3DCP Group explains: “3D print technology is a real gamechanger in construction as it brings new architecture to life that would otherwise not have been possible by conventional brick and mortar methods. COBOD’s innovative 3D construction printing technology makes it possible to print with real concrete, increase efficiency and significantly reduce the man-hours used in construction. We could not have realized the design using any other method.”

According to Mikkel Brich, studies have shown that 3D printing uses 70% less concrete compared to concrete element construction and that CO2 emissions from construction sites can be reduced by up to 32% when using 3D printing. By automating processes and building with construction robots it is also possible to reduce the man-hours in the construction process by up to 50%.

The design of the house required the roof to be made of 5 parts, each with quite a unique shape. Sourcing such a roof from a precast plant would be virtually impossible and making it with formwork equipment was deemed to be very costly. Therefore, 3DCP Group used a new innovative method for making the roof, where the printer did as much of the roof as possible by letting it print the first part of the roof on the ground, after which the roof parts were lifted into place on the building and then cast together, as can be seen in the video at the top of this page.

Commenting on the successful build of the 3D printed tiny house, Henrik Lund-Nielsen, Founder & General Manager of COBOD International said: “We are proud to have made the technology for this project. 3DCP Group proved that the technology can not only make the walls but can also help make the foundation and the roof. Making roofs with unusual shapes using our technology without the need for formwork equipment is a new and cost-saving method for the construction sector globally.”

Photo credits: 3DCP & Saga Space Architects. Video credit: COBOD

Research 2021
Ceramic AM Market Opportunities and Trends

This market study from 3dpbm Research provides an in-depth analysis and forecast of the ceramic additive ma...

3D Printing Media Network

3D Printing Media Network is the online trade media portal published by 3dpbm, a leading marketing and market research firm specializing in the AM industry. 3dpbm also publishes the 3D Printing Business Directory, the AM Focus eBook series and the 3dpbm Research AM Market Reports. 3D Printing Media Network was founded with the goal to provide the latest industry news, insights and opinions to a global audience of professionals and decision makers.

Related Articles

Back to top button

We use cookies to give you the best online experience and for ads personalisation. By agreeing you accept the use of cookies in accordance with our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services

STAY AHEAD

OF THE CURVE

Join industry leaders and receive the latest insights on what really matters in AM!

This information will never be shared with 3rd parties

I’ve read and accept the privacy policy.*

WELCOME ON BOARD!